Installing Rs-232C/Rs-422A Converters; Mounting The Pt To The Control Panel - Omron NS8-TV0-V2 Setup Manual

3-1 Installing the PT
3-1-2
3-1-3
3-4
Downloaded from Elcodis.com electronic components distributor

Installing RS-232C/RS-422A Converters

When using RS-232C/RS-422A Converters, mount the PT to the control panel before install-
ing these Units.
For details on installing and removing RS-232C/RS-422A Converters, refer to Appendix 3
Using NS-AL002 Converters.

Mounting the PT to the Control Panel

The PT is flush-mounted to the control panel.
The PT is mounted using the panel mounting brackets provided with the PT, and tools, such
as a Phillips screwdriver.
Use the following procedure to mount the PT to the control panel.
1. Make a hole in the panel for flush mounting according to the following dimensions and
insert the PT from the front of the panel.
Height
Width
Model
Width 383.5
NS15
Width 302
NS12
Width 302
NS10
Width 220.5
NS8
Width 184
NS5
Reference
A NS-USBEXT-1M USB Relay Cable can be used to place a USB slave connector on the
front of the control panel. To use a USB Relay Cable, mount the Cable connector in a
panel cutout with the following dimensions.
19.4±0.1 dia.
Recommended panel thickness:
1.6 to 4.8 mm
Dimensions
× Height 282.5
+1 +1
mm
0 0
× Height 228
+1 +1
mm
0 0
× Height 228
+1 +1
mm
0 0
× Height 165.5
+0.5 +0.5
mm
0 0
× Height 131
+0.5 +0.5
mm
0 0
20.8±0.1 dia.
Unit: mm