Omron NS8-TV0-V2 Setup Manual page 179

Downloaded from Elcodis.com electronic components distributor
Item
Alarm Monitor Registration Specifies the method for performing monitor registration of alarms
Method and events.
Starting Ladder Monitor Specifies whether to start the ladder monitor when an alarm/event
from Alarm/Event Sum- summary or history record is pressed.
mary and History
(NS15/NS12/10/8 only)
Tag Update Notification Specifies whether to display a confirmation message before start-
Message Setting ing tag verification when tags are verified while the NS-series PT is
operating.
Time to Switch to System Sets the time required to switch to the System Menu when two of
Menu (NS12, NS10, NS8, the four screen corners are pressed. The time to switch to the Sys-
or NS5) tem Menu can be set to between 0 and 5 s.
Double-touch interval With the NS15, one corner of the screen must be touched twice in
(NS15 only) a row to move to the System Menu. The interval between the
touches can be set.
Analog RGB Output Sets whether to use the analog RGB output. The default setting is
(NS15 only) Disable.
3. Project Tab
Item
Project Title Displays the project title.
Number of Labels Displays the number of corresponding labels.
Initial Screen Sets and displays the screen numbers first displayed after the
power is turned ON.
Initial Label Sets and displays the label number shown on the screen after the
power is turned ON.
Alarm/Event Recording Displays the method for recording the alarm/event histories.
Method
Data Log Recording Displays the method for recording the data log.
Method
Operation Log Recording Displays the method for recording the operation log.
Method
Error Log Recording Displays the method for recording the error log.
Method
System Memory ($SB) Displays the allocated addresses of the system bit memory ($SB). P. 6-35
System Memory ($SW) Displays the allocated address of the system word memory ($SW). P. 6-35
4. Password Tab
Item
Level 1 Changes the level 1 password.
Level 2 Changes the level 2 password.
Level 3 Changes the level 3 password.
Level 4 Changes the level 4 password.
Level 5 Changes the level 5 password.
Password mode Selects the password function (including passwords with levels).
Time Out Specifies whether user authentication is automatically canceled
after a set time has elapsed.
Timeout (min) Sets the timeout time.
Switch Screen when Specifies whether the screen is switched automatically when au-
canceling the authentica- thentication is canceled.
tion
Switch Screen No. Sets the screen number that is displayed at when authentication
is canceled.
6-1 Operating Modes and System Menu
Function
Function
Function
Page
P. 6-30
P. 6-30
P. 6-31
P. 6-31
P. 6-32
P. 6-32
Page
P. 6-33
P. 6-34
P. 6-34
P. 6-34
P. 6-34
P. 6-34
P. 6-35
P. 6-35
Page
P. 6-36
P. 6-36
P. 6-36
P. 6-36
P. 6-36
P. 6-37
P. 6-38
P. 6-38
P. 6-38
P. 6-38
6-5