Installing Expansion Memory Boards And Rs-232C/Rs-422A Converters; Mounting The Pt To The Control Panel - Omron NS7 Series Setup Manual

3-1 Installing the PT
3-1-2 Installing Expansion Memory Boards and RS-232C/RS-422A
Converters
When using Expansion Memory Boards or Adapters, mount the PT to the control panel be-
fore installing these Units.
For details on installing and removing Expansion Memory Boards, refer to 3-5 Using Expan-
sion Memory Boards. For details on installing and removing RS-232C/RS-422A Converters,
refer to Appendix 4 Using NS-AL002 RS-232C/RS-422A Converters.
3-1-3

Mounting the PT to the Control Panel

The PT is flush-mounted to the control panel.
The PT is mounted using the panel mounting brackets provided with the PT, and tools, such
as a Phillips screwdriver.
Use the following procedure to mount the PT to the control panel.
1. Make a hole in the panel for flush mounting according to the following dimensions and in-
sert the PT from the front of the panel.
横
Width
Model
NS12
NS10
NS7
3-4
Height
縦
Recommended panel thickness:
1.6 to 4.8 mm
Dimensions
´ Height 228
+1 +1
Width 302
0
´ Height 228
+1 +1
Width 302
0
´ Height 165.5
+0.5
Width 220.5
0
mm
0
mm
0
+0.5
mm
0