Omron NS8-TV0-V2 Setup Manual page 182

6-1 Operating Modes and System Menu
6-8
Downloaded from Elcodis.com electronic components distributor
The second corner pressed can be any of the other three corners. The System Menu will be
displayed even if functional objects are displayed.
Reference
The time required to switch to the System Menu can be set in the Time to keep pressing
2 corners on the screen [sec] for Entering System Menu Field on the PT Settings Tab
Page in the System Menu.
2. Press one of the four corners of the touch panel twice in a row (NS15 only).
Make sure you press a corner where no functional object is displayed. If there is a functional
object at the corner you press, the function of the functional object will be executed.
Reference
The touch interval (i.e., speed) for pressing one of the four corners of the touch panel
twice in a row can be adjusted using the double-touch interval setting on the PT Tab
Page in the System Menu.
3. Pressing the Command Button in the System Menu
While creating screens, if a command button for displaying the System Menu is created in
the screen, the System Menu can be displayed by pressing this command button.
4. Pressing Command Buttons to Switch Screens
The Display System Menu function of command buttons includes an option to display the Ini-
tialize Tab (the first screen of the System Menu). Press a command button for which this op-
tion has been set.
Alternatively, the Screen Switch command button functions include a Indirect Specification of
Screen No. function. Store the BCD value 4002 (binary FA2) in the communications address
for indirect specification and press the command button.
Refer to 2-9 Buttons in the Programming Manual for information on command buttons.
5. Storing 4002 in $SW0 (in System Memory)
A BCD value of 4002 (binary FA2) can be stored in $SW0 (in System Memory). Refer to 2-4
System Memory in the NS Series Programming Manual for information on the system mem-
ory.
6. Press a Multifunction Object to Display the System Menu
Press the Switch Screen Button of Multifunction Object and set it to Display System Menu -
System Menu Top Page [Initialize Tab]. Then touch or change the value of this Multifunction
Object to display the System Menu.
Press one corner
twice in a row.