Loading Paper; Paper Tray, 500/1000-Sheet Paper Feed Unit - Pitney Bowes DP50S Operating Instructions Manual

5. Paper and Other Media

Loading Paper

This section describes how to load paper into the paper tray or onto the bypass tray.
Do not add paper to a tray before it runs out of paper. If you do so, multiple sheets of paper may be
fed at one time, which results in a paper jam.

Paper Tray, 500/1000-sheet Paper Feed Unit

The following example explains how to load paper into paper trays, and how to change paper size.
The same procedure can be used for all trays. Tray 2 is used as an example.
• Make sure paper is not stacked higher than the upper limit mark inside the paper tray. Paper misfeeds
5
might occur.
• Do not mix different types of paper in the same paper tray.
• During printing, do not open or close the printer covers or bypass tray, or pull out or push in the paper
tray.
1. Carefully pull out the paper tray until it stops.
When printing using the bypass tray, do not pull out the paper tray.
70
BMV054S