Replacing The Fusing Unit, Transfer Roller, And Dustproof Filter; Replacing The Fusing Unit - Pitney Bowes DP50S Operating Instructions Manual

Replacing the Fusing Unit, Transfer Roller,
and Dustproof Filter
Replace the fusing unit if any of the following messages appear on the display:
Replace the transfer roller and the dustproof filter at the same time.

Replacing the Fusing Unit

When replacing the fusing unit, clean it simultaneously.
• The fusing unit becomes very hot. When installing a new fusing unit, turn off the printer and wait
at least an hour after power off before replacing parts. Not allowing the printer to cool may
result in burns.
1. Turn off the printer and unplug the power cable.
2. Push up the lever on the right side, and open the printer's right cover carefully.

Replacing the Fusing Unit, Transfer Roller, and Dustproof Filter

BMV103S
6
113