Memory Problems; Paper Out/Paper Jam Problems - Pitney Bowes da95f Operator's Manual

Memory Problems

Problem
Out of Memory The printer can run

Paper Out/Paper Jam Problems

Problem
Paper Out or
Paper Jam
SV61749 Rev. D
Reason
out of memory when
downloading fonts or
graphics.
Reason
Input area is empty.
Paper jam obstructing
paper path.
Paper jam in exit
roller area.
Dirty paper feed
sensor.
Stuffed envelopes not
feeding properly.
Separator assembly
not adjusted correctly.
Thickness setting too
tight.
Troubleshooting • 4
Solution
This generally means you're
trying to use a graphic (artwork)
that's too big or you have too
many fonts or too large a font
size. If the out-of-memory
message appears, try reducing
the size of your art and limiting
the number and size of your
fonts. Then turn the printer OFF,
then ON and retry.
Solution
Refill the input area.
Clear obstructed path.
Make sure exit rollers are
rotating freely.
Clean sensor with compressed
air or dry cotton swab. See
Chapter 3, Printer Maintenance.
Try running job with envelopes
unstuffed.
Adjust the separator assembly
to the thickness of the material
you're running. See Chapter 2,
Printer Basics.
Adjust the media thickness knob
clockwise to widen the gap.
4-9