Table of Contents
Advertisement
Device no.
Signal
Fault record
RWrC
(energization time)
Reply code
RWr10 to
RWr19
Read data
*1
When position control is selected for the FR-A800 series, the number of pulses is monitored when Pr.430 ≠ "9999".
72
DETAILS OF INPUT AND OUTPUT SIGNALS
Energization time of the fault history No. specified in RWw8 is stored.
When "1" is set in RYF, the reply codes corresponding to the instruction code RWw10, 12, 14, 16, and
18 are set. The value "0" is set for a normal reply and other than "0" is set for data fault, mode error,
etc. (Refer to
page
73.)
For a normal reply, the reply data to the instruction specified by the instruction code is set.
Description
Advertisement
Table of Contents
