Table of Contents
Advertisement
3.6 Mounting the Unit
This section describes the procedure to install the product.
Important
This product is a sensitive device. Take caution not to let it drop when installing.
Use screws to fix the product through the provided mounting screw holes for installation on
the wall or other equipment where vibration or shock may directly affect the unit.
3.6.1 Free-stand Installation
Important
When placing the product on a desk or other elevated object, place it at a sufficient distance
from the edges or corners of the object to prevent the unit from dropping to be damaged.
Be careful with handling of the power cable, sensor head and LAN cable to prevent them
from being hooked.
3.6.2 Securing with mounting screws
There are mounting screw holes at the back of the unit. The unit can be secured on the wall or
other surface.
M3 screw
The dimensions to process the screw holes are as follows.
Important
The depth of the screw hole is 4 mm. Do not tighten screws more than 4 millimeters. It will
cause the damage to the product.
3-18
3. Check and Preparation
Advertisement
Table of Contents
