Omron ZN-DPX21-S Series User Manual page 81

(Data can be output to the SD memory card by pressing the button after inserting the SD
memory card.)
*4 A mode to record the latest measurement value for the maximum capacity of the internal
memory at all times. (When reaching the upper limit of the internal memory, data item will be
discarded from the oldest.)
*5 Output when the value exceeds the upper limit that has been set in threshold value setting mode,
or falls short of the lower limit.
*6 Except for Air Particle Sensor connection mode.
*7 When using a third party SD card, it is recommended to use a reliable and durable industrial SD
card (SD standard or SDHC standard (not compliant with SDXC standard), Class 4 or higher,
flash memory type SLC or MLC type). You must confirm the operation of the SD card yourself.
*8 Nickel metal hydride batteries or alkaline batteries can be used. Manganese batteries cannot be
used.
*9 The battery life varies according to measurement environment, sampling, measurement
operation mode, battery's type and performance.
*10 In case using Mounting Magnet ZN9-EM01-S (sold separately), install the product in a location
where impact is not applied. Vibration resistance is 10 to 50 Hz, double amplitude 0.3 mm,
acceleration 20 m/s
*11 The attached connector is XW4B-02B1-H1.
2
, 50 min for each in X, Y and Z directions.
7-4
7. Appendix