Omron ZN-DPX21-S Series User Manual page 83

*4 Output when the value exceeds the upper limit that has been set in threshold value setting mode,
or falls short of the lower limit.
*5 When using a third party SD card, it is recommended to use a reliable and durable industrial SD
card (SD standard or SDHC standard (not compliant with SDXC standard), Class 4 or higher,
flash memory type SLC or MLC type). You must confirm the operation of the SD card yourself.
*6 Nickel metal hydride batteries or alkaline batteries can be used. Manganese batteries cannot be
used.
*7 The battery life varies according to measurement environment, sampling, measurement
operation mode, battery's type and performance.
*8 In case using Mounting Magnet ZN9-EM01-S (sold separately), install the product in a location
where impact is not applied.
Vibration resistance is 10 to 50 Hz, double amplitude 0.3 mm, acceleration 20 m/s
each in X, Y and Z directions.
*9 The attached connector is XW4B-02B1-H1.
7-6
7. Appendix
2
, 50 min for