Table of Contents
Advertisement
Observe the following precautions to ensure safe operation.
Do not install the product in the places subject to exposure to water, oil, or chemicals.
When using an AC adapter, use only the attached AC adapter.
When using a DC power supply cable, use only the attached DC power supply cable.
If a voltage that exceeds the rated voltage is applied to the AC adapter or DC cable,, smoking may occur.
Do not connect a power supply that exceeds the rated voltage. In a situation where a voltage higher than
the rating is applied, use protective equipment so that the power supply voltage does not exceed the
rated voltage.
Dispose of the product as industrial waste.
To use the batteries properly, read the precautions written by manufacturer before use.
Do not subject the product to a shock such as dropping the product. Doing so may cause damage to or
malfunction of the product. It is recommended to secure screws when mounted on the wall surface to
prevent damage from dropping the product. If strong impact is applied to the product, stop use of the
product.
When inserting or pulling out the SD memory card, hold the main unit to prevent damage from dropping
the product. When inserting or pulling out an AC adapter or DC power supply cable, alarm output cable,
sensor connector or LAN cable, hold the unit as well.
Mount an appropriate load on the alarm output terminals due to the possibility of smoking.
If liquid crystal leaks due to a damage to the LCD panel, be careful so that your skin will not touch with or
you will not inhale or swallow it. If liquid crystal enters into your mouth, seek medical attention.
Precautions for Safe Use
vi
Advertisement
Table of Contents
