Table of Contents
Advertisement
[Memory Full – Need Retry]
No available buffer for system report.
[Print... - Log history]
Printing log history when there are more then 20 records.
[Report Error – Need Retry]
System report maybe exist other errors except the above 2
[Code Update – Fail]
Can not update front end / back end code
[Para Update – Fail]
Can not update parameters correctly in front end FLASH
[Paper Size Error - Set A4/8.5x11]
< 3 sec >
[Paper Size Error- Press Set Key]
If paper size error (only support A4 or Letter)
[XXX-XXX Reboot System]
System Error.
Note:
•
When you found any error message that shown [XXX-XXX – Reboot System] (X: 0~9) on the LCD
screen, this is belong to system error, please reboot your system again, if this error message still
existed, please contact with our technical support engineer to service you and troubleshooting..
•
One error message is possible to indicated in different mode or function executed. In this user guide we
are omit the duplicated error message in this guide. You can contact with our technical support team to
get detail information of error message.
11.7 Replacing components
11.7.1 Replacing the retard pad
To replace the retard pad for the ADF, do the following:
1. Open the Cover A (ADF cover). You will find the retard pad as shown below.
All manuals and user guides at all-guides.com
- 164 -
Advertisement
Table of Contents
