Scanner Settings; Copy Settings - Fuji Xerox DocuPint C2090 FS User Manual

Table of Contents

Advertisement

8.3 Scanner settings

You can configure the settings for brightness and scan resolution by doing the following:
To configure the brightness of the scanned images:
1.
Press <Scan> then <Image Quality> button.
2.
Use the <◄/►> to choose [Brightness] and press <Set> to confirm.
3.
Press the <◄/►> button to increase the brightness of the scan copy. And press the <◄> button to
decrease it.
4.
Press the <▲> button to return to [READY] mode.
To configure the scan resolution of the scanned images:
1.
Press <Scan> then <Image Quality> button.
2.
Press the <◄/►> buttons to choose [ScanResolution] and press <Set> to confirm.
3.
Use the <◄/►> buttons to choose scan resolution. You can set resolution to 150 dpi, 300 dpi, 600
dpi, or 1200 dpi.
4.
Press <Set> to confirm your choice.
5.
Press the <▲> button to return to [READY] mode.

8.4 Copy settings

You can adjust the copy size by a specific zoom ratio or a specific percentage for enlargement or reduction
(25 to 400%). The default zoom ratio is set to 100%.
To adjust the copy size, do the following:
1.
Press <Copy> button on the control panel.
2.
Press the <Reduce / Enlarge> button and use the <◄/►> buttons to select copy size as
• 100%
• Preset 70%
• Auto fit
• Full Image
• Zoom 25% - 400%
Press <Set> to confirm your setting
3.
When select Zoom 25%-400% you can also use the number keypad to enter a specific zoom
percentage.
4.
Press the <Set> button to confirm your setting.
5.
Press the <▲> button to return to [READY] mode.
All manuals and user guides at all-guides.com
- 75 -

Advertisement

Table of Contents
loading

Table of Contents