Table of Contents
Advertisement
•
After installing the drum cartridge, the printer makes an adjustment for about one to two minutes. Do
not switch off the printer during this time.
3.8 Installing extra memory
Memory expansion to 256 MB is supported for this printer. When additional memory is installed, the total
memory capacity becomes 352 MB respectively. This total 352MB memory size is included front-end and
back-end memory.
Important:
•
Do not touch the connectors of the additional memory module
•
Do not bend or damage the additional memory.
•
Be sure to touch a metal surface to eliminate static electricity before touching the additional memory
with your bare hands.
To add more memory when the printer is in use, you need to configure the memory capacity in the print driver.
For details, refer to the Online Help for the print driver.
1. Make sure the machine is turned off when adding or removing the SDRAM module.
2. Slowly flip up part B, you will find the cover of the memory slot.
3. To open the cover, release the screws, and then pull the cover out of the printer.
All manuals and user guides at all-guides.com
- 29 -
Advertisement
Table of Contents
