Table of Contents
Advertisement
4.3 Setting 1000BASE-X for SFP+ Port
The Managed Switch supports both 1000BASE-X and 10GBASE-X SFP transceiver
by manual setting and the default SFP+ port speed is set to 10Gbps.
For example, to establish the fiber connection with 1000BASE-X SFP transceiver in
the Ethernet 1/25, the following command configuration is required:
Switch#config terminal
Switch(config)#interface ethernet 1/25
Switch(config-if)#speed-duplex 1000full
4.4 Saving the Configuration
In Managed Switch, the running configuration file stores in the RAM. In the current
version, the running configuration sequence running-config can be saved from the
RAM to FLASH by copy running-config startup-config command, so that the
running configuration sequence becomes the start-up configuration file, which is
called configuration save.
Switch# copy running-config startup-config
Startup configuration file name: startup1.cfg
10
Figure 4-6: Setting 1000BASE-X Screen
Hide quick links:
Advertisement
Table of Contents
