Adjusting the
Parking-Brake Latch
If the parking brake fails to engage and latch, adjust
the brake pawl.
1.
Loosen the 2 screws securing the parking-brake
pawl to the frame
Figure 86
1. Brake cables
2. Screw
2.
Press the parking-brake pedal forward until the
brake detent completely engages on the brake
pawl
(Figure
86).
3.
Tighten the 2 screws locking the adjustment.
4.
Press the brake pedal to release the parking
brake.
5.
Check the adjustment and adjust as required.
(Figure
86).
3. Parking-brake pawl
4. Brake detent
Belt Maintenance
Servicing the Alternator
Belt
Service Interval: After the first 10 hours
Every 100 hours
Note:
Proper tension will allow 10 mm (3/8 inch)
deflection when a force of 44 N (10 lb) is applied on
the belt midway between the pulleys.
1.
If the deflection is not 10 mm (3/8 inch), loosen
the alternator mounting bolts
g011617
1. Mounting bolt
2.
Increase or decrease the alternator-belt tension
and tighten the bolts.
3.
Check the deflection of the belt again to ensure
that the tension is correct.
57
(Figure
87).
Figure 87
2. Alternator
g020537