To Set the Auto Idle
•
In the Settings Menu, scroll down to Auto Idle.
•
Press the right button to change the auto idle time
between OFF, 8S, 10S, 15S, 20S, and 30S.
To Set the Blade Count
•
In the Settings Menu, scroll down to Blade Count
•
Press the right button to change the blade count
between 5, 8, or 11 blade reels.
To Set the Mow Speed
•
In the Settings Menu, scroll down to Mow Speed.
•
Press the right button to select mow speed.
•
Use the center and right button to select the
appropriate mow speed set on the mechanical
mow-speed limiter on the traction pedal.
•
Press the left button to exit mow speed and save
the setting.
Specifications
Note:
Specifications and design are subject to
change without notice.
Specification
Transport width
Width of cut
Length
Height
Weight
(with fluids and 8 blade cutting units installed)
Engine
Fuel-tank capacity
Transport speed
Mowing speed
Attachments/Accessories
A selection of Toro approved attachments and accessories is available for use with the machine to enhance
and expand its capabilities. Contact your Authorized Service Dealer or Distributor or go to www.Toro.com for a
list of all approved attachments and accessories.
To Set the Height of Cut (HOC)
•
In the Settings Menu, scroll down to HOC.
•
Press the right button to select HOC.
•
Use the center and right button to select the
appropriate HOC setting. (If the exact setting is
not displayed, select the nearest HOC setting from
the list displayed).
•
Press the left button to exit HOC and save the
setting.
To Set the Front and Rear Reel
Speeds
Although the front and rear reel speeds are calculated
by inputting the number of blades, mow speed and
HOC into the InfoCenter, the setting can be manually
changed to accommodate for different mowing
conditions.
•
To change the Reel Speed Settings, scroll down to
the F Reel RPM, R Reel RPM or both.
•
Press the right button to change the reel speed
value. As you change the speed setting, the
display continues to show the calculated reel
speed based on blade count, mow speed and
HOC, which was previously entered, but the new
value will also be displayed.
ReelMaster® 5410-D
228 cm (90 inches)
254 cm (100 inches)
282 cm (111 inches)
160 cm (63 inches)
1,335 kg (2,943 lb)
Yanmar
36 hp
53 L (14 US gallons)
0 to 16 kph (0 to 10 mph)
0 to 13 kph (0 to 8 mph)
25
ReelMaster® 5510-D
233 cm (92 inches)
254 cm (100 inches)
282 cm (111 inches)
160 cm (63 inches)
1,420 kg (3,131 lb)
Yanmar
36 hp
53 L (14 US gallons)
0 to 16 kph (0 to 10 mph)
0 to 13 kph (0 to 8 mph)