Toro 03606A Operator's Manual page 9

117–0169
1. Read the Operator's Manual.
2. Power point—10 amp
3. Head lights—10 amp
4. Power—10 amp
5. Engine start—15 amp
6. Optional air ride seat suspension—10 amp
7. Engine computer management C—10 amp
8. Engine computer management B—10 amp
9. Engine computer management A—10 amp
110-8921
1. Traction unit speed
2. Slow
3. Fast
117–2718
1. Warning—read the Operator's Manual, do not operate this
machine unless you are trained.
2. Thrown object hazard—keep bystanders a safe distance
from the machine.
3. Tipping hazard—slow machine before turning, do not turn
at high speeds; lower the cutting unit when driving down
slopes; use a rollover-protection system and wear the seat
belt. Always wear a seat belt when a ROPS is in place.
r:\decal117-0169
4. Warning—do not park the machine on slopes; engage the
parking brake, lower the cutting decks, stop the engine and
remove the ignition key before leaving the machine.
5. Warning—read the Operator's Manual, do not tow the
machine.
(Affix over Part Number 110-8869 for CE*)
* This safety decal includes a slope warning required on the machine for
compliance to the European Lawn Mower Safety Standard EN ISO 5395:2013. The
conservative maximum slope angles indicated for operation of this machine are
1. Warning—read the Operator's Manual, do not operate this
decal110-8921
machine unless you are trained.
2. Thrown object hazard—keep bystanders a safe distance
from the machine.
3. Tipping hazard—do not operate on slopes greater than 15°;
lower the cutting decks when operating on slopes; wear
the safety belt.
4. Warning—do not park the machine on slopes; engage the
parking brake, lower the cutting decks, stop the engine and
remove the ignition key before leaving the machine
5. Warning—read the Operator's Manual before towing the
machine.
decal117-2718
9
110-8869
110-8973
prescribed by and required by this standard.
r:\decal110-8869
r:\decal110-8973