Safety And Instructional Decals - Toro 03606A Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or lost.
1. Cutting/dismemberment hazard, fan—stay away from
moving parts.
1. Stored energy hazard—read the Operator's Manual.
1. Warning—do not touch the hot surface.
2. Cutting/dismemberment hazard, fan and entanglement
hazard, belt—stay away from moving parts.
1. Press the brake pedal and parking brake pedal to set the
parking brake.
2. Press the brake pedal to apply the brake.
3. Press the traction pedal to move the machine forward.
4. Reel enabled mode
5. Transport mode
93-7272
93–6696
106-6754
110-0986
decal93-7272
1. Engine coolant under
pressure.
2. Explosion hazard—read
the Operator's Manual.
decal93-6696
1. Stored energy hazard—read the Operator's Manual.
2. Move the cotter pin to the hole closest to the rod bracket
and then remove the lift arm and pivot yoke.
decal106-6754
decal110-0986
8
106-6755
3. Warning—do not touch the
hot surface.
4. Warning—read the
Operator's Manual.
110-9642
decal106-6755
decal110-9642