Toshiba MMU-UP0051MH-E(TR) Service Manual page 177

No. Part name
Fan motor [UP015 to UP024]
(Continued)
1. Detachment
(1) Following to works of 1 of
the Fan assembly parts.
(2) Remove the wire clamps which fixes the fan motor
lead. (Two positions).
(3) Take off the screws (8 pcs) for outer fan case (2pcs) to
the fan motor and remove the tape for inner fan case
to remove the outer fan case.
(4) Take off the screws (4 pcs) for inner fan case to
remove the inner fan case.
(5) Take off screws (2 pieces) for capacitor cover to
remove the capacitor cover.
(6) Remove the capacitor lead wire from the capacitor.
(7) Take off the screws (2 pieces) fixing the motor band to
remove the motor band, fan motor-reinforcement plate,
and fan motor.
2. Attachment
(1) Attach the fan motor, motor band, and fan case as
original.
* When attaching the Sirocco fan, meet the fixing
* When fixing the Sirocco fan, ensure that the Sirocco
* For the tightening torque of the screw fixing the
* When connecting the capacitor, be careful of its
(2) Following to the works in 1 of
the Fan assembly parts as original in the reverse
procedure.
Procedure
screw for Sirocco fan to the notch position on the.
shaft of the fan motor.
fan does not hit to the fan case.
Silocco fan, control between 5.0 to 5.2 N•m.
connection position.
and (1) to (5), detach
, and (1) to (5), attach
– 177 –
Remarks
Wire clamp
Screw
Screw Outer fan case
Sirocco fan fixing screw
Discharge port
Inner fan case Screw Inside the fan case
Capacitor lead wire (Red)
Capacitor cover
Inside the fan case
Screw
Earth wire Screw
Fan motor lead
Screw
Screw
Sirocco fan
Tape