Toshiba MMU-UP0051MH-E(TR) Service Manual page 145

No. Part name
2. Attachment
Center
panel
1) Insert hook of the center panel into shaft of the adjust
(Continued)
cover. (2 positions at left and right sides) Insert hook
attached with a panel stopper.
Note
Be sure to attach a hook with panel stopper at first. If
attaching a hook without panel stopper at first, the center
panel cannot be attached.
2) Hang S-shape bracket of the wire to the wire fixing
part from down side.
Note
If hanging it from upside, the bracket may come off when
opening/closing of the center panel.
The wire is provided to prevent falling of the center panel.
Be sure to attach it to the wire fixing part.
Wire fixing part
3) Turn the center panel slowly to (1) direction and then close it.
4) Under condition that opening port side of the center
panel closes, lift up the bump at hanged side (2) and
then slide it to (3) hanged side to fix it.
Hold the positions near the hooks at both sides of the
center panel, and fix it to the unit one by one.
Air filter 1. Detachment
1) Perform work Detachment 1 of
2) Hold knob of the air filter, pull it downward while
pushing it slantingly upward and then remove claws
from frame of the center panel.
2. Attachment
1) Enter the air filter until it hits the back end of the frame
of one side.
Hold another knob, lift up the air filter until it hits the
back, and leave the knob to attach the air filter.
Procedure
S-shape bracket
Hang to the wire fixing part
from down side.
.
– 145 –
Adjust cover
Wire fixing part
Wire
Panel stopper
(Condition that inserting into adjust cover shaft)
Wire
If hanging it from upside,
the bracket may come off when
opening/closing of the center panel.
Center panel
Hanged side
Bump
Hanged side
Remarks
Center
panel
Hook
Hook
(1)
Opening
port side
(3)
(2)
(3)
(2)
Opening
port side
Air filter
Knob
Claw