Toshiba MMU-UP0051MH-E(TR) Service Manual page 166

No. Spare parts
Refrigerant 1. Detachment
cycle (1) Recover the refrigerant gas.
assembly (2) Take off the connecting pipe.
(Liquid pipe and gas pipe)
(3) Following to works 1 of
the parts.
(4) Take off the reinforcement plate.
(M4 screw: 2 pieces)
(5) Remove the upper panel)
(M4 screws: 4 pieces)
(6) Remove the vertical grille.
(M4 screws: 4 pieces)
(7) Remove the shield plate for heat exchanger (Front).
(M4 screws: 3 pieces)
(8) Remove the shield plate for heat exchanger (Right).
(M4 screws: 2 pieces)
(9) Take off the screws which fix the heat exchanger.
(M4 screws: 4 pieces)
(10) Remove the shield plate.
(M4 screws: 2 pieces)
(11) Slide the heat exchanger horizontally, release
2. Attachment
Following step 1 of
the parts as original in the reverse procedure.
Drain pan 1. Detachment
assembly (1) Following step 1 of
detach the parts.
(2) Remove the drain pan assembly.
2. Attachment
Following step 1 in
the parts as original in the reverse procedure.
Work procedure
, and (1) to (10), detach
liquid pipe, gas pipe from the drain pan, and then
pull out it to the upper side.
and those in (1) to (11), attach
and those in (1) to (11),
and those in (1) to (2), attach
– 166 –
Remarks