Toshiba MMU-UP0051MH-E(TR) Service Manual page 155

No. Part name
1. Detachment
PMV coil
1) Perform work Detachment 1 of 8 .
2) Remove the relay connector of PMV coil.
(Only relay connector of UP048 type is connected in
the vinyl tube. Therefore cut off the bundling band
which fixes the tube and then remove the relay
connector.)
3) A little PMV coil is rotated, pressing down so that a
PMV body may not turn, and it removes in the
direction of an arrow.
2. Attachment
1) Attach PMV coil and relay connector as original.
Note
Be careful of direction of a PMV coil. Check that four
projections of the fixed claw of PMV coil and PMV body
have fitted in.
Procedure
– 155 –
Remarks
Relay connector: UP048 type only Relay connector: AP048 type only Relay connector: AP048 type only
(Inside of vinyl tube (Black)) (Inside of vinyl tube (Black)) (Inside of vinyl tube (Black))
In cases of UP009/UP027
PMV coil PMV body
In cases of UP048
PMV coil PMV body
The lead wire of PMV
PMV coil
coil is turned in the
fixed claw
top plate direction.