Technical Information
Stir Tool Design Changes
1. Profile reduction on sweeper – introduced to eliminate contact with the bowl. Contact
only occurs with the sweeper in the position as shown in Photo 1. Date code of
introduction to be advised.
Please note, this has never caused any damage to the tool, bowl or the machine.
2. Body cast height increased – to control distance between bayonet locating pin and collar
of tool, eliminating the potential for tool jam. See Photo 2.
Comparison of original and modified tool – Photo 3.
The modified stirring tool will be stocked under KW713836
Photo 1.
Photo 3.
Photo 2.
46