Table of Contents
Advertisement
Registering Print Settings
You can configure and register up to
four sets of settings for printing scan
data. Memory areas named " Default
", " User 1", " User 2", and " User 3" are
available for registering Print Set-
tings. You can easily recall the set-
tings you have registered to " User 1",
" User 2", or " User 3", which means
you don't have to configure detailed
settings each time you print scan da-
ta. Settings registered to " Default "
apply when you print scan data with-
out selecting " User 1", " User 2", or "
User 3", or without manually config-
uring Print Settings.
Information to Register in
[Print Settings]
❖ ❖ ❖ ❖ Scan Type
This item lets you specify the type
of originals (text or photo) for
black and white or gray scale scan-
ning.
Note
❒ The following options do not
apply when you configure set-
tings to perform scan with full
colour.
• Text
Select this option for standard
originals containing mainly
text. With this option, scan is
performed with black and white
(halftoning is done by error dif-
fusion).
• Text/Photo
Select this option for originals
containing a mixture of text and
photographs. By selecting this
option, scan is performed with
gray scale.
• Photo
Select this option for originals
containing photographs and/or
other pictures. By selecting op-
tion, scan is performed with
gray scale.
❖ ❖ ❖ ❖ Image Density
Use this item to adjust density of
the image for scanning. You can se-
lect one of seven steps from 1
(lightest) to 7 (darkest).
❖ ❖ ❖ ❖ Original Size
Use this item to select the size of
the originals to be scanned. You
can select from the following op-
tions.
Auto Detect, A3S, A4S, A4R,
A5S, A5R, 11x17S, 8
1
1
8
/
x13S, 8
/
x11R, 8
2
2
R, 5
1
1
1
5
/
x8
/
/
2
2
B5JISS, B5JISR, Custom size
• The original sizes available for
the [Auto Detect] function change
depending on where you place
the originals (on the exposure
glass or on the ADF). See p.110
"The Original Sizes Available
for Auto Detection" for details.
• When you select [Custom Size],
you can specify the dimensions
of the scan area (width and
height).
❖ ❖ ❖ ❖ Duplex
Use this item to select a type of du-
plex prints.
(1 Sided Orig. → 1 Sided
•
Print)
Scans a single-sided original
and prints onto a single-sided
page.
Registering Print Settings
1
/
x14S,
2
1
/
x11S,
2
S, B4JISS,
1
x8
/
2
2
3
79
Advertisement
Table of Contents
