Selecting A Sender - Savin IS300e Operating Instructions Manual

Sending Scan File by E-mail

Selecting a Sender

You can select a sender of an e-mail
using the [Sender] list on this machine.
The [Sender] list displays the regis-
tered users, whose [Register as Sender]
settings (included under [Configura-
tion] → [E-mail Settings] → [E-mail Ad-
dress] on the Web Status Monitor) are
set to " On ".
A A A A
Press [Sender].
The list of the senders that are reg-
istered to this machine appears.
B B B B
Use [Next] and [Prev.] to scroll
6
through the pages, use the { { { { 1 1 1 1 } } } }
and { { { { 0 0 0 0 } } } } keys to highlight the
sender you want to select, and
then press [Select].
This selects the check box next to
the sender's name.
Note
❒ Selecting another sender auto-
matically deselects the sender
currently selected (so the check
mark next to the sender's name
is cleared).
❒ While highlighting a sender
with its check box selected,
press [Clear] to clear the check
box (this deselects the sender).
134
❒ When you select a user whose
[Sender's Password] setting (in-
cluded under [Configuration] →
[E-mail Settings] → [E-mail Ad-
dress] on the Web Status Moni-
tor) is set to " On ", a dialog box
for entering a password ap-
pears. Enter the registered pass-
word using the number keys.
❒ You can recall specific senders
by selecting a title.See p.129 "To
recall destinations using a title".
C C C C
Press [OK].
This returns to the E-mail standby
screen.