Table of Contents
Advertisement
Setting Originals
Original Orientation
The original can be set either in sideway or lengthway orientation, but to assure
that the top/bottom orientation of the original comes out correctly when the
scanned file is displayed on a computer, the correct placement must be selected.
The setting orientation differs depending on whether the width of the original is
within or larger than 297mm (11.7"), which is equal to the length of the longer
side of the A4-size.
• Original width is within 297mm (11.7")
4
• Original width is wider than 297mm (11.7")
Note
❒ Use the ADF when you perform duplex scanning.
112
Advertisement
Table of Contents
