Table of Contents
Advertisement
9. Sending Scan Files Using
This chapter explains procedures to deliver a scanned file to multiple destina-
tions by using a delivery server with ScanRouter V2 Professional/Lite installed.
Procedure Breakdown
The following overview diagram shows the flow of the steps for sending a
scanned file using an address book on a delivery server. Note that the under-
lined steps are essential.
Note
❒ Some of the steps such as making scan settings are identical to those ex-
plained under "Sending Scan Files by E-mail". See the relevant pages shown
to the right of the following overview diagram.
Place originals in the ADF or on the exposure glass.
Confirm the transmission results by using the Web Status
*1
The settings that are configured using ScanRouter V2 Professional/Lite determine
the file type and compression method of the image file to be distributed.
Select a destination.
Select a sender.
*1
Make scan settings.
Press the { { { { Start} } } } key.
Monitor.
Delivery Server
⇒ p.126 "Before Send-
ing Scan Data"
⇒ p.156 "Selecting De-
livery Destinations"
⇒ p.134 "Selecting a
Sender"
⇒ p.132 "Making Scan
Settings"
⇒ p.135 "Performing
Scan Operation"
⇒ p.137 "Checking
Transmission Results"
155
Advertisement
Table of Contents
