Sending Scan File By Scan To Ftp; Selecting An Ftp Server - Savin IS300e Operating Instructions Manual

Sending Scan File by Scan to FTP

Selecting an FTP Server

You can select a single FTP server as a
destination to which you send a
scanned file. Follow the steps below
to select an FTP server.
A A A A
Press the { { { { 1} } } } key.
Note
❒ You can skip this step when the
E - m a i l / S e n d F i l e s t a n d b y
screen is displayed.
The E-mail/Send File standby
screen is displayed.
B B B B
Press [Dest.].
8
Note
❒ If " On " is selected for [Auto Up-
date Destination List] in [2.Send
Scan Settings] under the Scanner
Features menu on this machine,
the destination list is automati-
cally updated when you press
[Dest.]. See p.61 "Auto Update
Destination List" for details.
C C C C
Press the { { { { 1 1 1 1 } } } } or { { { { 0 0 0 0 } } } } key to high-
light [FTP], and then press [Set-
tings].
The list of the FTP servers that are
registered to this machine appears.
150
D D D D
Use [Next] and [Prev.] to scroll
through the pages, and display
the FTP server name you want to
select.
E E E E
Use the { { { { 1 1 1 1 } } } } and { { { { 0 0 0 0 } } } } keys to
highlight the FTP server name
you want to select, and then press
[Select].
This selects the check box next to
the FTP server name.
Note
❒ Because you can select only one
FTP server, selecting another
FTP server automatically dese-
lects the FTP server currently
selected (so the check mark next
t o t h e F T P s e r v e r n a m e i s
cleared).
To recall FTP servers using a title
A Press the { { { { ./*} } } } (Title) key.
List of titles appears on the
screen.
Note
❒ Titles are displayed accord-
ing to the settings in [Configu-
ration] → [Basic Settings] →
[Scanner] → [Select Title] on
the Web Status Monitor.