Outline To Use Scan To Print - Savin IS300e Operating Instructions Manual

Configuring the Scanner Settings

Outline to Use Scan to Print

The following overview diagram shows the preparation steps for printing scan
data by Print Scan. Note that the underlined steps are essential.
Reference
There are three types of setup items: 1) items that you can configure settings
using the control panel of this machine, 2) items that you can configure set-
tings using a Web browser on a client computer, 3) items that you can config-
ure settings using both of the above. See p.41 "Initial Scanner Setup" for
3
details.
This manual covers only the setting procedures that you can perform using
the control panel of this machine. For details about settings this manual does
not cover, see the Web Status Monitor Help. For information about how to
view the Web Status Monitor, see p.84 "Accessing the Scanner"
Configure [1.System Settings] on this ma-
Configure [2.SendScan Settings] on this ma-
chine or on the Web Status Monitor
Configure [Printer] and [Custom Title] settings
Configure [General Settings] on the Web Status
Configure [3.PrintScanSettings] and [5.Print Set-
tings] on this machine or on the Web Status
Recall the Settings on the Web Status Monitor
*1
This step is essential only when you use a network printer. This step is not essential
when you use a local printer.
40
*1
chine
on the Web Status Monitor
Monitor
Monitor
See p.52 "System Settings"
See p.59 "Scanner Settings"
See p.96 "Information to register in
[Printer]"
See the Web Status Monitor Help for
details about Custom Title settings.
See the Web Status Monitor Help.
See p.67 "Print Scan Settings" and p.70
"Registering Scan Settings"
See p.98 "Recalling the Settings" for
details.