Installing Smartdevicemonitor - Savin IS300e Operating Instructions Manual

*1
You cannot use the Ethernet board setup tool included in the SmartDeviceMonitor
for Admin when you access to this machine (it's not possible to change the device
name and the IP address of this machine). You can change the device name and the
IP address of other devices.

Installing SmartDeviceMonitor

Use Auto Run for installation.
A A A A
Start Windows, and then insert
the supplied CD-ROM labeled
"Scanner Driver & Document
Management Utilities" into the
CD-ROM drive of the computer.
The CD-ROM Launcher screen ap-
pears.
B B B B
Click the key of the software to be
installed.
• Click [SmartDeviceMonitor for Ad-
min], and then the SmartDevice-
M o n i t o r f o r A d m i n S e t u p
screen appears.
• Click [SmartDeviceMonitor for Cli-
ent], and then the SmartDevice-
Monitor for Client Setup screen
appears
C C C C
Follow the instructions on the
screen.
Note
❒ After the installation is com-
plete, the " SmartDeviceMonitor
for Admin " or " SmartDevice-
Monitor for Client " folder is in
the "Program" folder on the
Start menu. Help can be dis-
played from here.
❒ Notes on using the relevant
software are provided in "Re-
adme.txt". Be sure to read them
before use.
Installing Software
107
3