System Settings; Information To Set In [System Settings] - Savin IS300e Operating Instructions Manual

Configuring the Scanner Settings

System Settings

This section describes the setup items
contained in the System Settings
menu. They include an item used to
select the initial screen of the ma-
chine, and basic setup items for oper-
ating this machine on a network, such
as an IP address setting. This section
also shows you how to configure
3
these settings using the control panel
of this machine.
Note
❒ See p.186 "Using Wireless LAN"
for information about how to use
an optional wireless LAN card.
Information to Set in [System
Settings]
Note
❒ You can configure the settings that
are mentioned in this section, us-
ing the Web Status Monitor. How-
ever, you must configure the IP
address setting using the control
panel of this machine first. And
then, you can change the setting on
the Web Status Monitor.
❖ Function Priority
This item lets you select the initial
screen that is displayed when you
turn the power on.
• Select: Send/Print
52
When you select this option, "
Select Method " screen is initial-
ly displayed. On this screen,
pressing the { { { { 1} } } } key displays
the Delivery Server standby
screen or the E-mail/Send File
standby screen, depending on
the settings in [7.Select Method].
Pressing the { { { { 2} } } } key displays
the Print Scan initial screen for
printing scan data.
• Send Scan
When you select this option, the
Delivery Server standby screen
or the E-mail/Send File standby
screen is initially displayed. The
screen initially displayed de-
pends on the settings in [7.Select
Method].
• Print Scan
When you select this option, the
Print Scan standby screen is dis-
played as the initial screen.
❖ ❖ ❖ ❖ IP Address
When a fixed IP address is as-
signed to this machine on the net-
work you use, enter the IP address
t o t h i s i t e m i n t h e f o r m o f
xxx.xxx.xxx.xxx (xxx:0 through
255).
Do not specify this item manually
when you use this machine on a
DHCP environment. An IP ad-
dress is automatically assigned to
this machine by selecting " DHCP "
for [Network Boot].