Print Scan Operation Error Messages - Savin IS300e Operating Instructions Manual

Image scanner
Table of Contents

Advertisement

Appendix
Exceeded max. scan pages. To
scan remaining pages as a new
job,
press
then press the Start key.
[Exit]

Print Scan operation error messages

Printer
Check the printer.
[Exit]
The printer is current-
ly in use. Cannot print.
[Exit]
Selected printer is not
supported.
printer.
[Exit]
No
response
device. Check the power
and cables.
[Exit]
Warming up... Check the
printer.
[Exit]
Add paper to the print-
er.
[Exit]
Add Toner Replace Toner
Bottle in the printer.
11
[Exit]
Cover
printer.
[Exit]
Paper Misfeed Check the
printer.
[Exit]
Functional
Check the printer.
[Exit]
176
Message
[Exit]
Message
is
offline.
Check
the
from
the
Open Check
the
Problems
Possible Cause and Required Action
• Continued scanning and reached the max-
imum scan limit (100 pages). Press [Exit].
The scanned original is sent. The specified
destination and scanning condition set-
tings remain the same even after you have
pressed [Exit]. Place the next original and
press the { { { { Start} } } } key.
Possible Cause and Required Action
• The printer you have selected for printing is currently
offline. Press the { { { { Online} } } } key on the printer to make it
online. Press [Exit] to start printing.
• The printer is currently in use. Press [Exit] to cancel the
print job (this discards the scan data), and try again lat-
er.
• The printer is not compatible with this machine. Select
other printer that is supported for use with this ma-
chine.
• The printer is not responding. Check if the power of
the printer is turned on, and the cables are connected
correctly.
• The printer is not ready to print, because it is still
warming up. Wait until the printer is ready.
• Take the necessary actions in accordance with the mes-
sage that is displayed. See the manual that comes with
the printer for information about adding paper, replac-
ing toner bottle, closing the cover of the printer, or
clearing misfeeds.
• The printer has functional problems other than those
mentioned above. Check to make sure that the printer
operates normally. See the manual that comes with the
printer.

Advertisement

Table of Contents
loading

Table of Contents