Selecting Colour/Black And White - Savin IS300e Operating Instructions Manual

Note
❒ While highlighting a printer
name with its check box se-
lected, press [Clear] to clear
the check box (this deselects
the printer).
❒ If you want to select from an-
other title, press the { { { { ./*} } } } (Ti-
tle) key. This displays list of
titles again.
To recall all available printers
A Press the { { { { ./*} } } } (Title) key.
List of titles appears on the
screen.
B Use the { { { { 1 1 1 1 } } } } or { { { { 0 0 0 0 } } } } key to
highlight [All], and then press
[OK].
C C C C
When you are finished, press [Ex-
it].
This returns to the Print Scan
standby screen.
Selecting Colour/Black and
White
When you perform a Print Scan oper-
ation, you can select between "colour"
scanning and "black and white" scan-
ning. If you do not select this setting,
the default setting selected using [Col-
our/Black and White] (in [3.Print Scan Set-
tings] under the Scanner Features
menu) applies.
A A A A
While the Print Scan standby
screen is displayed, press [CLR
/B&W].
B B B B
Use the { { { { 1 1 1 1 } } } } or { { { { 0 0 0 0 } } } } key to high-
light [Black and White] or [Colour] on
the screen.
Note
❒ When the above screen is dis-
played, currently selected op-
tion is highlighted.
C C C C
While the option you want is
highlighted, press [OK].
This returns to the Print Scan
standby screen.
Note
❒ Pressing [Cancel] discards the
selected option, and returns to
the previous screen.
Printing Scan Data
167
10