Id Chip Board; Psu - Kyocera PE-MF2 Service Manual

ID Chip Board

1. Operation panel (* p.26)
2. Rear cover (* p.25)
3. Left cover (* p.27)
4. Controller bracket (* p.66 "Controller Board")
5. Disconnect the connector (CN305) on the EGB.
6. Interlock switch base (* p.70 "Interlock Switches")
7. Fusing fan base (* p.71 "Fusing Fan Motor")
8. Drive unit (* p.35 "Black AIO Motor")
9. Take the harnesses aside around the LSU fan base [A].
10. LSU fan base [A] ( x 2,
11. ID Chip Board [B] ( x 3)

PSU

1. Operation panel (* p.26)
2. Rear cover (* p.25)
3. Left cover (* p.27)
4. Drive unit (* p.35 "Black AIO Motor")
5. LSU fan base (* p.72 "LSU Fan Motor")
x 1)
Electrical Components
4
73