Table of Contents
Advertisement
4. Appendix: SP Mode Tables
Engine Maintenance
Brand ID
LSU Adjustment
Trans. Belt Adjust
4
Fuser SC Detect
Color Registration
Reset Transfer Unit
Life Counter
Fuser SC Reset
Special Mode
Scan Maintenance
Mono Compression
Setting
40
00* – 7F
Displays the current brand ID number.
Do not change this setting (Designed for Factory Use).
Character: alphanumeric "0-9", "a-f", "A-F", only valid
Input 160 bytes
data can be input.
setting.
Input length: 160 bytes
When you execute "Trans. Belt Adjust", the transfer belt adjustment is done. This
calibrates the motor speed to match the length of the new transfer belt.
If On, the engine detects SC559. If Off, the engine does
On/Off*
not detect "Fusing SC Reset".
The engine will do color registration and density tuning automatically.
The machine will warm up automatically after this setting is changed.
Resets the transfer unit life counter.
This button is for resetting an SC related with the fusing errors.
This adjusts the M/A of toner.
[0 to 0x7F]
0x00: Normal (Default: no reduction)
0x06: 20% reduction
0x07: 10% reduction
Sets the monochrome compression type for scanning.
MH (Default)/ MR/ MMR
Advertisement
Table of Contents
Troubleshooting
