11.18
Removing the shock absorber
11.19
Installing the shock absorber
11.20
Removing the seat
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Detach brake line from the brake line guide.
–
Remove screw
as far as possible without blocking the rear wheel. Fix the rear
wheel in this position.
–
Remove screw
remove the shock absorber.
A00044-10
Main work
–
Push splash protector
absorber. Mount and tighten screw
Guideline
Screw, top
shock absorber
–
Mount and tighten screw
Guideline
A00044-11
Screw, bottom
shock absorber
–
Attach brake line.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Remove screw
–
Raise the rear of the seat, pull the seat back, and lift it off.
V00836-10
SERVICE WORK ON THE CHASSIS 11
1
and lower the rear wheel with the swingarm
2
3
, push splash protector
1
to the side and position the shock
2
.
M12
60 Nm (44.3 lbf ft)
3
.
M12
60 Nm (44.3 lbf ft)
1
.
p. 44)
to the side, and
Loctite
®
2701™
Loctite
®
2701™
p. 44)
53