11 SERVICE WORK ON THE CHASSIS
11.10
48
V00875-10
Installing the lower triple clamp
V00859-10
V00876-10
–
4
Remove protective ring
–
Take off the lower triple clamp with the steering stem in a
downward direction.
–
Remove the upper steering head bearing.
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount the
upper steering head bearing.
–
1
Slide on O-ring
.
–
2
Position protective ring
–
Position the upper triple clamp with the handlebar.
–
3
Mount nut
, but do not tighten it yet.
.
p. 121)
.