Table of Contents
Advertisement
–
Change the radiator cap.
–
Mount a dust cover on the air filter.
Dust cover for air filter (47206920000)
Info
See the KTM PowerParts fitting instructions.
M01104-01
–
Mount a sand cover on the air filter.
Sand cover for air filter (79006922000)
Info
See the KTM PowerParts fitting instructions.
M01105-01
–
Adjust the carburetor jetting and setting.
Info
Your authorized KTM workshop can recommend the
right carburetor tuning.
–
Clean the chain.
Chain cleaner (
–
Grease the chain.
M01107-01
Universal oil spray (
–
Clean the radiator fins.
–
Straighten bent radiator fins carefully.
Condition
Regular use in sand
–
Change the piston every 10 operating hours.
PREPARING FOR USE 7
Warning
Danger of scalding During motorcycle oper-
ation, the coolant gets very hot and is under
pressure.
–
Do not open the radiator, the radiator hoses
or other cooling system components if the
engine or the cooling system are at operat-
ing temperature.
–
Allow the cooling system and the engine to
cool down before you open the radiator, the
radiator hoses or other components of the
cooling system.
–
In the event of scalding, rinse the area
affected immediately with lukewarm water.
p. 121)
p. 122)
23
Advertisement
Table of Contents
