11.36
Checking the chain, rear sprocket, engine sprocket and chain guide
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Shift the transmission to idle.
–
Check the chain, rear sprocket and engine sprocket for wear.
»
If the chain, rear sprocket or engine sprocket is worn:
–
Change the drivetrain kit.
400227-01
–
Pull at the top part of the chain with the specified weight
Guideline
Weight, chain wear measure-
ment
–
Measure distance
section.
Info
Chain wear is not always even, so you should repeat
this measurement at different chain positions.
Maximum distance
18 chain rollers at the
longest chain section
»
If distance
–
Change the drivetrain kit.
400987-10
SERVICE WORK ON THE CHASSIS 11
Info
The engine sprocket, rear sprocket and chain
should always be replaced together.
10 ... 15 kg (22 ... 33 lb.)
B
of 18 chain rollers in the lower chain
219 mm (8.62 in)
B
from
B
is greater than the specified measurement:
Info
When a new chain is mounted, the rear sprocket
and engine sprocket should also be changed.
New chains wear out faster on an old, worn rear
sprocket or engine sprocket.
p. 44)
A
.
63