Removing The Fork Protector; Installing The Fork Protector; Removing The Lower Triple Clamp - KTM 85 SX 2019 Owner's Manual

11.7

Removing the fork protector

11.8

Installing the fork protector

11.9

Removing the lower triple clamp

–
Remove screws
–
Remove screws
tector.
–
Remove screws
tector.
V00824-10
–
Position the fork protector on the right fork leg. Mount and
tighten screws
Guideline
Remaining screws,
chassis
–
Position the fork protector on the left fork leg. Mount and
tighten screws
Guideline
V00825-10
Remaining screws,
chassis
–
Position the brake line and clamp. Mount and tighten
3
screws .
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove the start number plate. (
–
Remove front fender. (
–
Remove the handlebar cushion.
Main work
–
Pull fuel tank breather
–
Loosen screw
clamp with the handlebar in an upward direction, and hang it
to the side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
V00874-10
SERVICE WORK ON THE CHASSIS 11
1 and take off the clamp.
2
on the left fork leg. Take off the fork pro-
3
on the right fork leg. Take off the fork pro-
1 .
M6 10 Nm (7.4 lbf ft)
2
.
M6 10 Nm (7.4 lbf ft)
( p. 82)
( p. 45)
p. 51)
p. 52)
1
out of the steering stem.
2 3
. Remove nut , pull off the upper triple
p. 44)
47