10 TUNING THE CHASSIS
10.15
10.16
42
Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
V00815-10
Handlebar position
C00248-10
Info
Turn clockwise to increase damping; turn counterclock-
wise to reduce damping.
–
1
Mount protection cap
–
Turn red adjusting screw
Info
1
Adjusting screw
right fork leg.
The rebound damping is located in right fork leg REB
(red adjusting screw).
–
Turn counterclockwise by the number of clicks corresponding
to the fork type.
Guideline
Rebound damping
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclock-
wise to reduce damping.
On the upper triple clamp, there are 2 holes at a distance of
each other.
Hole distance A
15 mm (0.59 in)
The holes on the handlebar supports are placed at a distance
B
of
from the center.
Hole distance B
3.5 mm (0.138 in)
The handlebar supports can be mounted in four different posi-
tions. This allows the handlebar to be mounted in the most com-
fortable position for the rider.
.
1
clockwise as far as it will go.
is located at the upper end of the
17 clicks
12 clicks
7 clicks
A
to