Table of Contents
Advertisement
Accepts additional analog stereo audio signals — The DTP T USW 333 supports
•
a direct pass-through connection for stereo analog audio signals for simultaneous
transmission over the same single twisted pair cable. Analog audio is not embedded
onto the digital video signal. A DTP 330 receiver can output balanced and unbalanced
audio, allowing streamlined integration within an AV system.
Bidirectional RS-232 and IR insertion for AV device control — Control and IR
•
signals can be transmitted alongside the video signal over DTP connections, allowing
the remote device to be controlled without the need for additional cabling. Bidirectional
control insertion eliminates the need for control system wiring to remote devices.
•
Remote power — For simplified installation, only one power supply is necessary to
power both devices. The switcher can remotely power another connected extender or
can be powered by a connected extender or matrix switcher.
•
Digital conversion of analog input signals — Analog signals are digitized, ensuring
that a reliable, high quality digital video signal is sent to the output destination.
•
EDID Minder — Automatically manages EDID communication between connected
devices, ensuring that all sources power up properly and reliably output content for
display.
•
Key Minder — Authenticates and maintains continuous HDCP encryption between
input and output devices, verifying HDCP compliance for quick, reliable switching in
professional AV environments.
•
Compatible with all DTP 330 receivers, and DTP 330-enabled products —
Enables mixing and matching with desktop and wallplate receivers, as well as other
DTP 330-enabled products to meet application requirements.
DTP T USW 333 • Introduction
3
Advertisement
Table of Contents
