About The Cveq1, Cveq1 Wm, And Cveq1 Aap; Features; Chapter 2 • Installation, Setup, Operation; Installation Overview - Extron electronics CVEQ1 AAP User Manual

Introduction

About the CVEQ1, CVEQ1 WM, and CVEQ1 AAP

The Extron CVEQ1 is a one-input, one-output, composite video
line driver. It features a 30 MHz (< ±0.5dB) video bandwidth.
It accepts one composite video input on a female BNC
connector and one stereo audio input on a pair of female RCA
connectors. One female BNC connector provides equalized
video output, and a five-pole captive screw connector provides
for stereo audio output.
The Extron CVEQ1 AAP is identical to the CVEQ1, except that it
is designed to be mounted in a double-space height architectural
adapter plate bracket (in a device's faceplate or in an AAP
wallplate) for installation into a wall or furniture.
The CVEQ1 WM shares the features of the other two models,
but it has a 1-gang faceplate for installation into a UL-approved
electrical wall box set into a wall or furniture.
In this manual "CVEQ1", and "line driver" will be used to refer
to all models interchangeably unless otherwise noted.

Features

Stereo audio — Unbalanced stereo audio input can be output as
balanced or unbalanced stereo audio.
Gain adjustment — All models offer a video gain adjustment
with a range of -6dB to +6dB.
Equalization adjustment — Each model also features an
equalization adjustment that changes the level and
peaking of the output signal to compensate for use of
long cables. The CVEQ1 series line drivers can drive
video signals through up to 1000 feet (304.8 meters) of
Extron SHR cable.
1-2 CVEQ1, CVEQ1 WM, CVEQ1 AAP • Introduction
CVEQ1, CVEQ1 WM, CVEQ1 AAP
Chapter Two
Installation, Setup, Operation
Preparing the Site and Installing the Wall Box
Rear/Bottom/Side Panel Features and Cabling
Top/Side Panel Features and Adjustments
2

Installation Overview

UL Requirements
Front Panel Features and Cabling
Mounting the CVEQ1 AAP
Mounting the CVEQ1 WM