Extron electronics DTP T USW 333 User Manual page 34

3. Click
Connect
Software opens to the
Operate the Product Configuration Software as described in the PCS Help (click
Extron PCS Help
Figure 16.
Updating the Firmware
The Product Configuration Software can call the Firmware Loader utility, which provides
a way to replace the firmware that is coded on the control board of the switcher without
taking the unit out of service.
NOTE: Upgrading the firmware does not overwrite the current configuration.
Update the unit firmware as follows:
1. Perform steps 1 through 6 of
download the firmware upgrade from the Extron website.
2. Click
Run
on the next page). The PC downloads the firmware update from the Extron website
2
and starts the Extron Installation Program to extract the firmware file.
(see figure 15, , on the previous page). The Product Configuration
2
Input/Output Configuration
).
Product Configuration Software
Installing the
in the and
File Download
page (see figure 16).
Software, starting on page 23, to
dialog boxes (see
Security Warning
DTP T USW 333 • Remote Control
>
figure 17,
26