Connection Via Remote Desktop Protocol (Rdp) - Siemens SIMATIC RF1000 Operating Instructions Manual

Hide thumbs Also See for SIMATIC RF1000:
Table of Contents

Advertisement

Marking
Thailand
A.2

Connection via Remote Desktop Protocol (RDP)

Using the Remote Desktop Protocol (RDP), you can use a reader that is physically connected to
the RDP client (e.g. Industrial Thin Client) on an RDP server. To establish a connection, you need
to edit the group policies for the USB redirection on both the RDP server and the RDP client.
The following procedure only works for the virtual COM port of the reader. Note that the
USB-HID interface cannot be used via RDP.
Editing RDP client group policies
Follow these steps to edit the group policies of the RDP client:
1. Open the Local Group Policy Editor on the RDP client.
To do this, enter "gpedit" in the Windows search field.
2. Navigate to the menu "Computer Configuration > Administrative Templates > Windows
Components > Remote Desktop Services > Remote Desktop Connection Client > RemoteFX
USB Device Redirection".
3. Double-click the entry "Allow RDP redirection of other supported RemoteFX USB devices from
this computer" and select the "Enabled" option box.
4. Select "Administrators and Users" in the drop-down list in the "Options" area.
5. Close the Local Group Policy Editor.
6. Open the command prompt.
To do this, enter "cmd" in the Windows search field.
7. In the command prompt, enter "gpupdate /force" to update the group policies.
8. Restart the client computer for your changes to take effect.
SIMATIC RF1000
Operating Instructions, 05/2023, C79000-G8976-C432-10
A.2 Connection via Remote Desktop Protocol (RDP)
Description
South Korea (KCC)
Korea Communications Commission
Certificate of Broadcasting and Communication Equipments
Republic of Korea
SIMATIC RF1040R (6GT2831-6CA50):
R-R-RF5-RF1040R
SIMATIC RF1060R (6GT2831-6AA50):
MSP-CRM-RF5-RF1060R
SIMATIC RF1070R (6GT2831-6BA50):
R-C-RF5-RF1070R
Marking requirements:
Following statement may be displayed on packaging or additional page or
on user's manual. For Sdoc, it is optional to display this wording.
"เครื ่ อ งโทรคมนาคมและอุ ป กรณ์ น ี ้ ม ี ค วามสอดคล ้องตามมาตรฐานหรื อ ข ้อกํ า หนด-
ทางเทคนิ ค ของ กสทช."
This telecommunication equipment conforms to the technical standards or
requirements of NBTC.
Appendix
89

Advertisement

Table of Contents
loading

Table of Contents