Connection Options And Supported Transponders - Siemens SIMATIC RF1000 Operating Instructions Manual

Integration
The following graphics show examples of some of the integration options of the readers.
Figure 3-2
Figure 3-3
3.2

Connection options and supported transponders

Depending on the interface protocol used, the readers can be used for various applications. The
following table provides an overview of the possible uses of the readers.
Table 3-2
Interface/Protocol
application
Programming
Connector
Cable
A connection via other applications is possible. You can find additional information on this in the section
1)
"Programming via the RS232 interface".
SIMATIC RF1000
Operating Instructions, 05/2023, C79000-G8976-C432-10
Reader connection via PC/PG
Reader connection via SIMATIC HMI
Possible uses
SIMATIC RF1060R
USB
PM LOGON,
demo application
DLL for PC
SIMATIC Panel, PC
Included in the
scope of delivery
3.2 Connection options and supported transponders
SIMATIC RF1040R/RF1070R
USB RS232 / Freeport
PM LOGON, STEP 7 (TIA Portal)
demo application
DLL for PC Ident profile/
blocks
SIMATIC Panel, PC RF166C,
RF170C,
RF18xC/CI
Included in the 6GT2891-
scope of delivery 4UH20
Description
1)
P2P
blocks
RF120C Serial
module
(e.g. ET
200SP)
6GT2891 6GT2891
-4UH20 -2UH30
13