Siemens SIMATIC RF1000 Operating Instructions Manual page 22

Installation
4. Push the reader through the opening intended for this purpose in the table/wall housing.
Make sure that the connected cable is routed through one of the rectangular cutouts in the
rear panel of the housing.
5. Turn the table/wall housing, together with the reader contained therein, to the front so that
the rear of the table/wall housing is at the top.
6. Fasten the reader in the table/wall housing by installing the reader in the housing
the 4x Torx screws (max. 1.5 Nm) and the four inside mounting holes of the table/wall
housing.
Figure 4-5
22
Installing the reader in the table/wall housing
Operating Instructions, 05/2023, C79000-G8976-C432-10
②
using
SIMATIC RF1000