GVRP and Bridge Extension Commands
GARP VLAN Registration Protocol defines a way for switches to
exchange VLAN information in order to automatically register VLAN
members on interfaces across the network. This section describes how to
enable GVRP for individual interfaces and globally for the switch, as well
as how to display default configuration settings for the Bridge Extension
MIB.
Command
bridge-ext gvrp
show bridge-ext
switchport gvrp
switchport forbidden vlan Configures forbidden VLANs for
show gvrp configuration
garp timer
show garp timer
bridge-ext gvrp
This command enables GVRP globally for the switch. Use the no form to
disable it.
Syntax
[no] bridge-ext gvrp
Default Setting
Disabled
GVRP
Table 4-58 GVRP and Bridge Extension Commands
Function
Enables GVRP globally for the
switch
Shows the global bridge extension
configuration
Enables GVRP for an interface
an interface
Displays GVRP configuration for
the selected interface
Sets the GARP timer for the
selected function
Shows the GARP timer for the
selected function
B
E
AND
RIDGE
XTENSION
C
OMMANDS
Mode Page
GC
4-249
PE
4-250
IC
4-251
IC
4-240
NE,
4-251
PE
IC
4-252
NE,
4-253
PE
4-249